When we customize shelves, there is currently no fixed calculation formula for the design of the aisle width and the width of the shelf operation channel, but the design of the channel width of the storage shelf is also an important factor for the convenience and safety of the goods on and off the shelves, and The ability to pick goods is also a decisive factor.

For different warehouse sizes, if the storage rack channel is narrow, or there is no channel like the dense storage rack, the space utilization rate of such a warehouse can be very high, but the sorting ability is extremely low, like this The storage shelves are suitable for storing large quantities of single goods. On the contrary, if the storage rack channel is wide enough and many, like beam racks, laminate racks, etc., the picking ability is strong, but the warehouse storage capacity is not high. Because of how to design the aisle when customizing storage shelves, this is very important.

1. In general, channel design mainly looks at the following aspects:

1. The size of the pallet, especially the direction of entry and exit, because it directly affects the selection of forklift tines and forklift selection.

To put it simply, the shelf aisle = small turning radius + front overhang + cargo length + 200mm, the result is the shelf aisle width, but it is worth noting that the small turning radius of any domestic manufacturer has a deviation of about 100mm from the actual , It is recommended to add 100mm more.

2. According to the forklift selection results, its right-angle stacking radius can be obtained. According to the direct spacing of the beam or considering the length of the span, calculate the length of the pallet to get the safe pallet width, plus the forklift to stack the right angle to a small value , I suggest adding a safe width here.

3. According to the requirements of the management method, more suitable storage shelves can be selected, which is convenient to reduce the number of channels between the shelves. For example, double-depth shelves reduce half of the channels compared with ordinary heavy-duty shelves. Drive-in shelves are a whole-building shelf with channels The number is less, but the picking rate of these two types of shelves cannot reach 100%, which is suitable for warehouses with bulk first-in first-out.

The above is the introduction of the shelf aisle width design compiled by Dinglibu for you. You can design the shelf width according to the above method.

In fact, the general plan for the design and calculation of shelf channel spacing, but in actual operation, various storage conditions are different. Both parties need to obtain high-quality parameters through active and effective communication, and plan and design the spacing of each row of shelves. Happening. As a professional shelf manufacturer, we have a professional design team to check for you.

2. Warehouse plant structure One point that must be considered when designing heavy shelves is the plant warehouse structure:

1. The lighting system and fire protection system of the warehouse.

2. The positions of the pillars and beams affect the overall placement of the shelves.

3. The height of the warehouse, the height of the warehouse determines the height of the shelves.

4. The bearing capacity of the floor, which affects the installation of the shelf and the load bearing of the shelf in the future.

5. Prevent the use of non-standard floor boards (card boards), pallets, etc. on the shelves. Chuan is most suitable.

When the shelf height exceeds eight meters, corresponding loading and unloading machinery is required. Therefore, the total channel area required is larger, and the storage density is smaller than other systems. Heavy-duty storage racks can realize quick access to various pallets, and the maximum unit size can reach 2000KG, which can adapt to various types of pallets and shelves. The height of the beam can be adjusted according to the requirements of the cargo size. The circulation of goods is large, convenient and fast. Heavy-duty racks have the lowest cost and can be quickly installed and folded.