Contact
Copyright ©2020 Guangzhou Dingli Storage Equipment Co., Ltd.
Address: Youbao Industrial Park, No.17 Xiangshan Middle Road, Science City, Huangpu District, Guangzhou
News
Brief analysis: What matters should be understood before shelf installation and what matters should we pay attention to during installation?
The installation of storage shelves is very important, and it is related to whether the installed shelves are safe or stable.So what should we know before the storage shelf installation and what should we pay attention to in the installation?1. Before we should be familiar with shelf installation, drawings and prepare engineering construction plan for unique or complex installation.Master the installation of the site transportation route, switch power supply and other conditions.The site roof and internal painting works shall be basically completed, and the relevant foundation floor and ditch shall be completed. The concrete strength shall be no greater than 75% of the design strength. The sundries and garbage in the installation construction site and nearby shall be cleaned and tidy.
2. When installing, the shelves should correct each component one by one and check the size of the components.The construction scope shall be delimited according to the plan and relevant building axes, edge lines and elevation lines.Determine the baseline position and draw the baseline.
3. The erected column pieces can be manual (or pulley, etc.), mechanical (crane, etc.) according to the height and weight of the column pieces, and at the same time can be equipped with a certain total number of beams to form a stable structure.After the column is erected, review the orientation and size according to the figure, and initially adjust the elevation, vertical and horizontal adjustments. If there are other accessories, it should be installed one by one, so that the data can reach the standard, and then it will be installed column by column.
The shelves shall be adjusted horizontally and vertically until it is met.Test the deflection under the crossbeam.Test test for stacker or forklift.All fasteners shall be checked one by one to ensure that all twist, and the bolts shall leak 2-4 spacing of nuts. After the sink screws are tightened, the sink heads shall be embedded in the components and shall not be exposed.
The above points are the full Xiaobian to sort out about the storage shelf installation before and when the installation needs to pay attention to, I hope to help you.