Contact
Copyright ©2020 Guangzhou Dingli Storage Equipment Co., Ltd.
Address: Youbao Industrial Park, No.17 Xiangshan Middle Road, Science City, Huangpu District, Guangzhou
News
Can attic shelf customization carry 1 ton per square meter?
Attic shelf system is to build an existing middle attic on the working space or shelf to increase storage space, can do two or three attic, should access some light bubble and small and medium goods, suitable for many varieties of large or small varieties of goods, artificial access goods, usually by the forklift, hydraulic lift or ladder to the second floor, third floor, then by light car or hydraulic tray car to a certain position.Such systems, usually using medium shelf or heavy duty shelf as support for the main and floor panels (which shelf to be selected based on the total load weight of the unit shelf), usually cold-rolled steel floor, pattern steel floor or steel grid floor.Such systems have many applications in the field of auto parts, automobile 4S stores, light industry, electronics and other industries.Atoft shelf This platform shelf is usually measured by the carrying capacity per square load, the carrying capacity is generally about 300-800kg per square meter, so many customers will ask when consulting the attic shelf custom can load 1 ton per square?So let's learn it together.
The design factors related to the attic shelf carrying capacity are the following:
I. Column
The general standard shelf is composed of column beam and lamination plate, and the attic shelves are double load-bearing columns with better carrying capacity.The span of the column is also very important, the larger the span, although the lower the cost, but the carrying capacity is much weaker.Therefore, the span of the column should be considered in combination with other relevant factors.
II. Crossbeam
Beams can be divided into main beams, secondary beams and support beams, which are similar to the building beams.These beams are used to withstand load where the spacing of support beams can disperse the pressure on floor panels.Therefore, the design of these beams is very exquisite, and will not reduce the number of beams due to budget problems.
III. Building panel materials
If you need a load of 1 ton of attic shelf, then in addition to the above aspects, should also consider the attic floor panel used materials, to achieve this carrying capacity of course can not use wood floors, in a unit area can effectively carry 1 ton of weight of material, should also be used within a safe range.
IV. Actual situation of the warehouse
The actual situation of the warehouse, especially the ground situation, if the ground itself is very uneven and the warehouse itself is limited, the carrying capacity of the designed attic shelf must be lower than the carrying range of the warehouse floor itself and should add a safety factor.
5. When conducting attic shelves, we must consider the attic shelf design itself.The design of the shelf should already take into account the various factors and details existing in the enterprise warehouse, rather than a simple parameter adjustment problem.
So the attic shelves of 1 ton per square load are fully custom-made.But this depends on the actual situation of the enterprise warehouse to design.